Svalson 7007

Svalson Sliding Window model 7007

Vertically sliding, electrically driven safety sliding window which is suitable for indoor installation. The sliding window has a 70* mm aluminium frame and can be equipped with up to 6.5 mm thick glass. The 7007 model can be produced with one or two moving sections, so that the largest possible part of the opening can be put to use. In its standard version, the sliding window is satin anodized and is equipped with 6 mm float glass. The frame can be finished by painting, powder coating or other forms of anodizing. The sliding window is equipped with a safety latch which prevents the window from dropping in the event of an accident. The sliding window is automatically locked in the closed position and at intervals across the entire opening height. Control is by means of a control box or pedal.

Technical Information

Width Customers choice**.
Height Customers choice.
* Frame thickness 70 mm with one movable section and 90 mm with two movable sections.
Width of side posts 50 mm.
Height of top profile 70 mm.
Bottom profile No.
Width/Height of glass frames 20 mm.
** It might be necessary to increase the dimensions on certain profiles it the width of the window exceeds 1400 mm. If the width of the window exceeds 1600 mm we recommend model 9018 or NJORD instead.
Construction Motor, transmission, safety latch and automatic locking are integrated within the frame.
Locking Mechanical lock which automatically locks the window in closed position and at 50 mm intervals across the entire opening height. Key lock is optional.
Motor 24 V DC.
Transmission Cord.
Traction force Approx. 20 N.
Relief for transmission Friction clutch.
Power supply Transformer. Battery back-up is optional
Type of control Manoeuvre box. Foot switch is optional.
Glass 6 mm float glass is standard. Other glass up to 6.5 mm thick is available as an option, such as 6 mm hardened or 6 mm laminated glass.
Finish Satin anodized (minimum 10 µm) aluminium is standard. Other surface finishes available as an option include powder coating, painting or anodizing in various colours.
Protection against fire No.
Alarm device Optional.
Design and material subject to change without prior notice.