The EntraQuick® I Quick Folding Gate is a type-tested, trackless bi-hinged gate, which is ideally suited to keep your perimeter secured. Its fast operation allows opening and closing after every entry or exit. It boasts speed, stability, reliability and low maintenance.
Main Features
- High Speed Opening and Closing
- Low Maintenance
- Replaces combined sliding gate and barrier installations
Design
- Double leaf Quick Folding Gate with folding leaves, drive posts, control unit and electro-mechanical drives
Certification
- Type-tested by notified body TÜV Nord
Clear Width (CW)
- 3000 – 6000mm in 500mm increments
Distance between Posts
- CW + 520mm
Gate Height
- 2050mm and 2450 incl. 100mm ground clearance
Gate Infill
- Bar infill made of rectangular hollow section RHS 30x20 with max. 120mm clear distance
Frame Profile
- Rectangular hollow section RHS 80x60x3
Weight
- Approx. 650kg for maximum applicable dimension
Drive Post
- Square hollow section SHS 200x6 with base plate to bolt on
Control Box (HxWxD)
- 600 x 400 x 210mm, IP66
Opening Direction
- Inwards (standard) or outwards
Lowered Foundation
- Top edge of foundation 200mm below finished floor level
Operating Speed
- Max. 1.0 m/s (double leaf, depending on CW)
Drive
- Electric drive 0.25 kW, 3~ 230 V Δ, 50 Hz
Emergency Operation
- By manual release of drive arm
Supply Voltage
- 230 V (1Ph + N + PE), 50 Hz
Control Unit
- Automatic control (maintained command) WE-Tronic II with frequency converter, control voltage 24 V DC
Safety Devices
- 6 nos. safety edges
- Light beam between drive post and receiving post at car and HGV height as well as in separate light beam posts on the side of the folded gate leaf at car height
Control Devices
- 1 no. key switch OPEN / STOP / CLOSE in right or left drive post
Temperature
- Control unit: -10 °C … +50 °C
- Drive: -45 °C … +50 °C
Finish
- Hot-dip galvanised and powder-coated in RAL 6005 moss green, RAL 7016 anthracite grey, RAL 7030 stone grey, RAL 7035 light grey or RAL 9010 pure white
Control Box (HxWxD)
- 600 x 400 x 210mm for wall installation inside a building, max. distance 50m
- 1200 x 600 x 400mm in seperate oudoor cabinet, incl. 200mm high socket, max. distance 50m
Control Devices
- Induction loops, additional light beam in light beam posts at HGV height, additional key switch OPEN/ CLOSE / STOP, key switch OPEN/ CLOSE / EMERGENCY STOP, key switch ON / OFF for automatic closing etc., key switch partial opening, key switch fire brigade, remote control with hand held transmitter, table top push button, timer, code key pad, card reader, intercom system
Signalling Devices
- Flashing permanent light or rotating beacon (LED), LED spot light, traffic light
Options
- Serrated top edge, alternative floor recess for lowered foundation up to 200mm, key safe, fence connection systems
Finish
- Hot-dip galvanised and powder-coated in other RAL colours
Technical Specification

