The EntraQuick® II Quick Folding Gate is a type-tested, trackless bi-hinged gate, which is ideally suited to keep your perimeter secured. Its fast operation allows opening and closing after every entry or exit. It boasts speed, stability, reliability and low maintenance.
Main Features
- High Speed Opening and Closing
- Low Maintenance
- Replaces combined sliding gate and barrier installations
Design
- Single or Double leaf Quick Folding Gate with folding leaves, drive posts, control unit and electro-mechanical drives
Certification
- Type-tested by notified body TÜV Nord
Clear Width (CW)
- 2000 – 5000mm in 500mm increments (single leaf)
- 4000 – 10000mm in 500mm increments (double leaf)
Distance between Posts
- CW + 400mm (single leaf)
- CW + 760mm (double leaf)
Gate Height
- 2050 mm incl. 100 mm ground clearance
- 2550 mm and 3050 mm incl. 100 mm ground clearance (only for CW ≤ 8000 mm)
Gate Infill
- Bar infill made of square hollow section SHS 30 with max. 120mm clear distance
Frame Profile
- Square hollow section SHS 100x5 (inner/leading gate leaf)
- Square hollow section SHS 100x4 (outer/trailing gate leaf)
Weight
- Approx. 1100 kg for maximum applicable dimension (single leaf)
- Approx. 1600 kg for maximum applicable dimension (dual leaf)
Drive Post
- Square hollow section SHS 260x10 with base plate to bolt on
Control Box (HxWxD)
- 600 x 400 x 210mm, IP66
Opening Direction
Single leaf- Left hand, opening inwards or right hand, opening inwards (standard)
- Left hand, opening outwards or right hand, opening outwards
- Inwards (standard) or outwards
Lowered Foundation
- Top edge of foundation 200mm below finished floor level
Operating Speed
- Max. 0.5 m/s (single leaf, depending on CW)
- Max. 1.0 m/s (double leaf, depending on CW)
Drive
- Electric drive 0.37 kW, 3~ 230 V Δ, 50 Hz
Emergency Operation
- By manual release of drive arm
Supply Voltage
- 230 V (1Ph + N + PE), 50 Hz
Control Unit
- Automatic control (maintained command) WE-Tronic II with frequency converter, control voltage 24 V DC
Safety Devices
- 4 nos. safety edges (single leaf)
- 8 nos. safety edges (double leaf)
- Light beam between drive post and receiving post at car and HGV height as well as in separate light beam posts on the side of the folded gate leaf at car height
- Active infrared-presence detector (for EntraQuick with 2050mm gate height)
Control Devices
- 1 no. key switch OPEN / STOP / CLOSE in right or left drive post
Temperature
- Control unit: -10 °C … +50 °C
- Drive: -45 °C … +50 °C
Finish
- Hot-dip galvanised and powder-coated in RAL 6005 moss green, RAL 7016 anthracite grey, RAL 7030 stone grey, RAL 7035 light grey or RAL 9010 pure white
Control Box (HxWxD)
- 600 x 400 x 210mm for wall installation inside a building, max. distance 50m
- 1200 x 600 x 400mm in seperate oudoor cabinet, incl. 200mm high socket, max. distance 50m
Control Devices
- Induction loops, additional light beam in light beam posts at HGV height, additional key switch OPEN/ CLOSE / STOP, key switch OPEN/ CLOSE / EMERGENCY STOP, key switch ON / OFF for automatic closing etc., key switch partial opening, key switch fire brigade, remote control with hand held transmitter, table top push button, timer, code key pad, card reader, intercom system
Signalling Devices
- Flashing permanent light or rotating beacon (LED), LED spot light, traffic light
Options
- Serrated top edge, alternative floor recess for lowered foundation up to 200mm, key safe, fence connection systems
Finish
- Hot-dip galvanised and powder-coated in other RAL colours
EntraQuick Mobile
- EntraQuick II mobile available for temporary installations
Technical Specification
EntraQuick® II Gate Technical Specification
EntraQuick II Mobile Gate Technical Specification
Hostile Vehicle Mitigation BrochureRequest Drawings
Specification RequestEntraQuick® II Quick Folding Gate
