The M50 Automatic Bollard is a high security hydraulically controlled retractable rising bollard preventing unauthorised wheeled access, whilst enabling free pedestrian movement. The units are crash tested to internationally accepted standards with an option to have emergency fast operation.

Main Features

  • Crash Tested and certified according to PAS 68:2013, IWA 14-1:2013 & ASTM
  • Blocking height up to 1100mm
  • Emergency fast operation –up to 2-3 seconds*
  • Tri-Protect® anti-corrosion protection coating
  • Environmentally Friendly biodegradable oil*

*Optional feature

Design

  • High security bollard in compact style with integrated hydraulic
    aggregate and separate control unit for up to five bollard units.

Certification

  • PAS 68:2013 V/7500[N3]/80/90:5.2/7.8,
  • IWA 14-1:2013 V/7200[N3C]/80/90:5.5
  • ASTM F 2656-07 M50/P2

Blocking Element

  • Diameter: 355mm

Blocking Height

  • 1100mm above finished floor level

Wall Thickness

  • 30mm

Weight

  • Approx. 1400kg incl. metal housing

Operating Times

  • Raising: approx. 5-6 seconds - Lowering: approx. 3-4 seconds
  • Emergency fast operation (EFO): approx. 2-3 seconds raising
    (with optional accumulator)

Wheel Load

  • 100 kN according to SLW60 – DIN 1072

Drive

  • 2.25 kW nominal power, 400 Volt AC, three phase, 50 Hz

Hydraulic Fluid

  • Mineral oil HLP 22 or biodegradable oil Plantohyd 22 S,
    non-hazardous to water

Control Unit

  • PLC in control box for wall installation inside a building, control voltage
    24 V max. distance between bollard and control unit: 50m

Supply voltage

  • 400 V (3Ph + N + PE), 50 Hz

Emergency Operation

  • Bollard remains in the raised position during power failure and
    can be lowered manually.
  • Accumulator and rechargeable battery pack for one raising movement
    (RO1) with charged accumulator (optional)

Finish

  • Tri-Protect®: Long-term anti-corrosion protection coating according to
    DIN 55633 corrosion category C5

Control Box (HxWxD)

Control unit configuration Standard/Plus:
  • 400 x 400 x 200mm, IP 66 (for single bollard unit)
  • 600 x 400 x 200mm, IP 66 (for double and triple bollard unit)
  • 600 x 600 x 200mm, IP 66 (for quadruple and quintuple bollard unit)
Control unit configuration Vario:
  • 600 x 400 x 200mm, IP 66 (for single and double bollard unit)
  • 600 x 600 x 200mm, IP 66 (for triple up to quintuple bollard unit)
Control unit configuration Vario RO1:
  • 800 x 400 x 300mm, IP 66 (for single and double bollard unit)
  • 800 x 600 x 200mm, IP 66 (for triple up to quintuple bollard unit)

Colour

  • Blocking element - RAL 6005, 7016, 7030, 7035 or 9010
  • Bollard top plate - galvanised finish
  • Cover plate - galvanised finish
  • Metal housing - galvanised finish

Temperature Range

  • -20°C – 65°C
  • Optional: Heating for up to -30°C

Lighting

  • Bollard top lighting, Ufo-shape, LED red, white or yellow

Tamper resistance

  • Reed contact for top plate and cover plate

Control Cabinet (optional)

Control box installed in outdoor control cabinet complete with rain cover,
hygrostat, thermostat, heater and outdoor coating Control unit configuration Vario:
  • 1000 x 800 x 400mm + 200mm socket (for control unit configuration Vario)
Control unit configuration VarioRO1:
  • 1200 x 1200 x 400mm + 200mm socket (for control unit configuration VarioRO1)

Colour

  • Blocking element - Any RAL colour
  • Bollard top plate - in RAL colour of blocking element
  • Cover plate - in RAL colour of blocking element

Optional Finish

  • Blocking element with stainless steel sleeve and stainless steel top plate

Technical Specification

M50 Automatic Bollard Technical Specification Hostile Vehicle Mitigation Brochure To request a PDF/DWG drawing please contact us
M50 Automatic Bollard