The M50 Tracked Sliding Gate provides protection from vehicle based attacks and is therefore ideal for all critical infrastructure applications or other designated high risk areas with large openings. The robust sliding gate design with shallow foundations is manufactured from heavy gauge material and high tensile steel offering reliable operation and low maintenance.

Main Features

  • Crash Tested and certified according to PAS 68:2013 & ASTM
  • High speed opening and closing, suitable for frequent use applications
  • Shallow foundation depth
  • Tri-Protect® anti-corrosion protection coating

Design 

  • Crash rated sliding gate on ground track with electro-mechanical
    drive unit, guiding portal, receiving portal and gate leaf consisting of
    bottom impact beam and top gate leaf panel.

Certification

  • ASTM F 2656-07 M50/P1
  • PAS 68:2010 V/7500[N3]/80/90:0.0/4.3 (tested with 7.0 m CWO)

Weight

  • Approx. 4710 – 6950kg (depending on CWO and gate height)

Clear width of Opening 

  • 3000 - 7000mm in 1000mm increments

Blocking Height

  • Gate height: 2000, 2500 and 3000mm (incl. 100mm ground clearance)

Clear width between Posts

  • Clear width of opening + 200mm

Frame Width

  • Clear width of opening + 2308mm

Ground Track

  • S10 to bolt onto top edge of foundation, top of rail 20mm
    above finished floor level

Foundation Depth

  • 400mm (shallow foundation)

Foundation Top Edge

  • 100mm below finished floor level

Emergency Operation 

  • Manually after disengagement of motor by clutch lever

Operating Speed 

  • Normal operation: up to 0.4 m/s

Drive

  • 1.5 kW, 400 V (three-phase), 50 Hz

Control Unit

  • WE-Tronic II in control box installed in drive column,
    control voltage 24 V

Supply Voltage 

  • 400 V (3Ph + N + PE), 50 Hz

Control Box (HxWxD)

  • 400 x 600 x 200mm, IP66

Applied Standards

  • DIN EN 13241 Industrial, commercial, garage doors and gates - Product standard, performance characteristics
  • EC-Machinery Directive (2006/42/EC)
  • EMC Directive (2014/30/EU)

Colour

  • RAL 6005 – moss green
  • RAL 7016 – anthracite grey
  • RAL 7030 – stone grey
  • RAL 7035 – light grey
  • RAL 9010 – pure white

Colour Drive Column

  • RAL 7035 – light grey

Finish

  • Tri-Protect® Long-term anti-corrosion protection coating according to DIN 55633 corrosion category C5.
  • For M50 Tracked sliding gates with a 7000mm opening the bottom impact rails are treated with the Tri-Protect® wet spray application. This provides a corrosion category C4.

Temperature 

  • Control unit: -10 °C … +50 °C
  • Drive unit: -20 °C … +40 °C (with power reduction up to +60 °C)

Colour

  • Any RAL colour or DB colour

Colour Drive Column 

  • In RAL colour of gate
  • Any RAL colour or DB colour

Technical Specification

M50 Tracked Gate Tecnical Specification Hostile Vehicle Mitigation Brochure To request a PDF/DWG drawing please contact us
M50 Tracked Sliding Gate