The PU30 EntraQuick® Bi-Folding Gate is an innovative single leaf trackless gate providing the ultimate security for vehicle access points due to its full height perimeter protection, rapid operating times and impact resistance. The gate is designed for continuous operation and is therefore perfect for use at highly frequented locations such as logistic centres or ports.
Main Features
- Unique self-locking arrestor system
- High speed opening and closing
- Low maintenance
- Anti-corrosion protection coating
PU30 EntraQuick® Gate
Design
- Single leaf Quick Folding Gate with folding leaf, drive post, receiving post, self-locking arrestor system, electro-mechanical drive and control unit
Certification
- PAS 68:2013 V/2500[N1G]/48/90/1.2/0.0
- IWA 14-1:2013 V/2500[N1G]/48/90/1.3
Clear Width (CW)
- 2000 – 4000mm in 500mm increments
Distance between Posts
- CW + 400mm
Gate Height
- 2050mm, 2550mm and 3050mm incl. 100mm ground clearance
Gate Infill
- Bar infill made of square hollow section SHS 30 with max. 120mm clear distance.
Frame Profile
- Square hollow section SHS 100x5 (inner/leading gate leaf)
- Square hollow section SHS 100x4 (outer/trailing gate leaf)
Weight
- Approx. 1450kg for maximum applicable dimension
Drive/ Receiving Post
- Square hollow section SHS 260x10 with base plate to bolt on
Control Box (HxWxD)
- 600 x 400 x 210mm, IP66
Opening Direction
- Left hand, opening inwards or right hand, opening inwards (standard)
- Left hand, opening outwards or right hand, opening outwards
Lowered Foundation
- Top edge of foundation 200mm below finished floor level
Operating Speed
- Max. 0.5 m/s (depending on CW)
Drive
- Electric drive 0.37 kW, 3~ 230 V Δ, 50 Hz
Emergency Operation
- By manual release of drive arm
Supply Voltage
- 230 V (1Ph + N + PE), 50 Hz
Control Unit
- Automatic control (maintained command) WE-Tronic II with frequency converter, control voltage 24 V DC
Safety Devices
- 4 nos. safety edges
- Light beam between drive post and receiving post at car and HGV height as well as in separate light beam posts on the side of the folded gate leaf at car height
- Active infrared-presence detector (for EntraQuick with 2050mm gate height)
Safety Standards
- Based on the design of the according to DIN EN 13241-1:2003 type-tested EntraQuick® II and furnished with identical standard safety devices
Control Devices
- 1 no. key switch OPEN / STOP / CLOSE in drive or receiving post
Temperature
- Control unit: -10 °C … +50 °C
- Drive: -45 °C … +50 °C
Control Box (HxWxD)
- 600 x 400 x 210mm for wall installation inside a building, max. distance 50m
- 1200 x 600 x 400mm in seperate oudoor cabinet, incl. 200mm high socket, max. distance 50m
Control Devices
- Induction loops, additional light beam in light beam posts at HGV height, additional key switch OPEN/ CLOSE / STOP, key switch OPEN/ CLOSE / EMERGENCY STOP, key switch ON / OFF for automatic closing etc., key switch partial opening, key switch fire brigade, remote control with hand held transmitter, table top push button, timer, code key pad, card reader, intercom system
Signalling Devices
- Flashing permanent light or rotating beacon (LED), LED spot light, traffic light
Options
- Serrated top edge, steel spikes (from 2550mm gate height), key safe, fence connection systems, special infills on request
Finish
- Hot-dip galvanised and powder-coated in RAL colours
Technical Specification
PU30 EntraQuick® Gate Technical Specification
Hostile Vehicle Mitigation BrochureRequest Drawings
Specification RequestPU30 EntraQuick® Gate
