The Shark Tyre Killer offers a high degree of protection against unauthorised entry or exit of hostile motor vehicles. If a vehicle attempts to break through, its tyres and/or axles will be destroyed depending on the model. The Shark Tyre Killers can be used individually or in combination with other products.

Main Features

  • Blocking Height of 215mm
  • Load bearing capacity up to bridge class SLW 60.
  • Shallow foundation depth

Design

  • Tyre Killer consisting of coupled blocking modules and drive module
    with drive housing, drive column, electro-mechanical
    drive and control unit

Blocking Width 

  • 2000 – 6000mm in 500mm increments

Spike Axle

  • Axle with spikes positioned at 100mm centre distance

Blocking Height

  • 215mm

Underground Housing (LxWxH)

  • 500mm blocking module: 500 x 510 x 260mm
  • 1000mm blocking module: 1000 x 510 x 260mm

Drive Housing (LxWxH)

  • 500 x 510 x 260mm

Drive Column (HxWxD) 

  • 1200 x 480 x 270mm complete with door, key switch raise-stop-lower and swing handle

Weight

  • 1.0 m blocking module: approx. 130kg
  • 0.5 m blocking module: approx. 72kg
  • Drive module: approx. 150kg

Operating Times

  • Raising: < 1.0 sec, lowering: < 1.0 sec

Wheel Load

  • 100 kN according to SLW60 – DIN 1072

Drive

  • 0.37 kW, 400 V (three-phase), 50 Hz

Control Unit

  • Control unit WE-Tronic II with contactor board in control box,
    installed in drive column, control voltage 24 V

Supply Voltage

  • 400 V (3Ph + N + PE), 50 Hz

Control Box (HxWxD)

  • 400 x 350 x 210mm, IP 66

Colour

  • Spikes - RAL 3000 flame red
  • Underground housing - RAL 7035 light grey
  • Cover plates - RAL 7035 light grey
  • Drive housing - RAL 7035 light grey
  • Drive column - RAL 7035 light grey

Finish

  • Tri-Protect®: Long-term anti-corrosion protection coating according to DIN 55633 corrosion category 4

Temperature Range

  • Control unit: -10 °C … + 50 °C
  • Drive unit: -25 °C … + 65 °C

Colour

  • Spikes - Any RAL colour
  • Underground housing - Any RAL colour
  • Cover plates - RAL 1007 daffodil yellow / RAL 9005 jet black or
    RAL 3000 flame red / RAL 9010 pure white
    Diagonal stripes or single colour
  • Drive housing - Any RAL colours
  • Drive column - Any RAL colours
   

PDF Drawings

Shark Tyre Killer Product Pack

DOWNLOAD

Send download link to:

I confirm that I have read and agree to the Privacy Policy.

Shark Tyre Killer