The Meesons Half Security Portals range is ideal for building’s that require secure unmanned access, but have limited space available. Fitting over an existing door, or available with a manual swing door, or two sliding doors, the Half Security Portals range create a high security entrance to eliminate tailgating with a small footprint.

For larger entrance areas the Half Security portal range is available with increased width and height options. The Meesons Half Security Portals range can be supplied in kit form or for higher security models can be ordered pre-built. The Half Security Portals range is available in two sizes 1381mm and 1910mm and can be customised with a range of security options and finishes available.

Meesons Half portal

HPJ140

Meesons Security Portal

FPJ140 1A

FPJ140 2S

fpj-140-2hp

FPJ140 2HP

fpj190

HPJ 190

fpj190-2s-web

FPJ190 2S

Meesons Security Portal

FPJ140 1AF Fire Rated

FPJ140 2SF Fire Rated

Main Features

  • Ideal for installing on to an existing finished floor
  • Space saving half portal design

Standard Glass

Portal Structure

KR Version

Anti-slip Mat

ral_rgb

RAL Colours

Unlocking Device

failsecure_rgb

Fail Secure Configuration

irpresence

Infrared Presence sensor

controlpanel_rgb

Control Panel

intercom

Intercom

semaforo_rgb

Traffic Light

light_rgb

Internal Light

safetysensor

Infrared Safety Sensor

firealarm_rgb

Fire Alarm Signal

batterie_emergenza_r1_rgb

Emergency Battery

add_emergency_lever_rgb

Emergency Lever Options


 Glass

Our portals are supplied as standard with Glass type P2A-EN 356. Higher specification Anti-Vandal and Bullet Proof Glass types are available, please refer to our cost options.

Portal Structure

All our portals are produced using EN 1522 Certified Metal Sheets. The portal structure is made by using FB4 Certified Metal Sheets and the Top Canopy is made by using FB2 Certified Metal Sheets. Return to standard features menu

Standard Version

All our half portals are supplied in surface mounted kit format (KR). The portal will be delivered in kit format in compact crates to allow for easier handling during transportation and installation. Breaking the portal down in to kit ensures it is able to pass through entrances, corridors and lifts without the need for excessive building modification. The half portals are supplied with a 12mm rail floor guide and can easily be installed on the finished floor and secured with fixings. Return to standard features menu

Anti-slip Floor Mat

Our Anti-slip black floor mat is manufactured in compliance with EN13893 and is Fire Reaction certificated Bfls1 in accordance with EN13501-1. With large anti slip tread the floor mat is suitable for high traffic areas and is easy to clean. Return to standard features menu

RAL Colours

You can customise your portal by choosing between a broad range of RAL Powder Coated colour codes. Return to standard features menu

 Unlocking Device 

The portals have a special mechanical mechanism which allows the opening of the secure door (only) in cases when a forced opening is required. Since the mechanism is situated on the secure side and it opens only the secure door, Security is not compromised. Return to standard features menu

Fail Secure configuration

In the event of a power failure (and a fully discharged emergency battery backup) the non-secure door will be closed and locked to prevent intrusion. Return to standard features menu

Infrared Presence Sensor

An infrared sensor is located in the ceiling of the Portal and detects the presence of a person inside the Portal. Return to standard features menu

Control Panel

A multi-functional touch sensitive panel enables the user to control the portal and can provide status updates.

Service Mode Key Switch

Service ModeKeyswitch this option is a local ON/OFF keyswitch selector and cleaning mode function. Usually installed on the secure side on Portal frame, it has 3 functions:
1.Switching ON the Portal
2.Switching OFF the Portal
3.Service Mode - enables secure cleaning of the portal Return to standard features menu

 Intercom

One service intercom is integrated on the control panel and another one on the security portal non secure side Traffic Light. Return to standard features menu

Traffic Light

An elegant and intuitive LED traffic light is installed on every portal. It informs the users on the status of the Portal: The green LED light informs the user the portal is ready for the next access; the red LED informs the user the portal cannot be used because it is in use or switched off. Return to standard features menu

Internal Light

An internal LED ceiling light provides light within the portal. The light can be either always switched on or can be activated when the portal is in operation. The warm white LED has a life expectancy of up to 50,000 hours if installed with thermal dissipation (t ≤ 70°C). Return to standard features menu

Infrared Safety Sensors

Infrared safety sensors detect the presence of an obstacle in the doors and prevent them from closing to avoid injury. Return to standard features menu

Fire Alarm Signal

The portal can be connected to the building fire alarm/emergency. In the event of a fire the doors can be set to open either the secure, non secure or both doors. Return to standard features menu

Emergency Battery

All portals are provided with an Emergency Battery backup in the event of a power failure. The Portal can work on the Emergency Battery for up to 6-8 hours of continuous operation. An indicator light and message on the control panel inform the user the Emergency battery is in use. Return to standard features menu

Emergency Lever Options

Each Security Portal is provided with a lever, handle or crank for unlocking the portal in an emergency. This is located inside the portal and will only open the door on the non secure side ensuring security is not compromised. Return to standard features menu

altezze_rgb

Versions Available

p4a_rgb

Glass Options

wk3

Security Ratings

controlpanel_rgb

Control Panel

apd_rgb

Detection Devices

Web LAN

internal_alcove_rgb

Internal Alcove

add_emergency_lever_rgb

Emergency Lever Options

polishedsteel

Outer Finishing


 Versions Available

Our security portals are also available in the following versions: S Version with 70mm base (Ext. Height: 2360mm)

Welded Portal Structure with 70mm floor base. The overall height of the Portal is 2360mm. The Portal requires a break into the floor or a small ramp.

    Extended Heightaltezze_rgb

The standard internal height of our portals is 2030 mm. However, we have introduced two more higher versions to meet customers needs for a higher portal:

2135mm (7') Internal portal Height.

2300mm (7'55) Internal portal Height.

Extended Depth

An extended depth option is also available across the half portal range.

 Return to cost options menu

Glass Options

Vandal Proof Glass  Glass type P4A-EN 356, thickness 14mm Glass type P6B-EN 356, thickness 27mm Glass type P7B-EN 356, thickness 31mm
Bullet Proof Glass  Glass type BR3-EN 1063, thickness 27mm. Glass type BR4-EN 1063, thickness 31mm.
 Return to cost options menu

Security Ratings

Attack Resistant Class 3 EN 1627-30:2000.
Attack Resistant Class 4 EN 1627-30:2000. Return to cost options menu

Control

Additional Control Panel

An additional control panel is available to control the security portal from a second location. Other control options include

1. Additional Control Panel with Display

2. 4" TFT monitor for Control Panel

Night Lock 

An additional mechanical locking procedure provides increased security when the portal is in night mode.

Return to cost options menu

Detection Devices

APD - Prevents Tailgating and Piggybacking

APD detects the volume inside the security portal by using ultrasonic technology, and allows the transit of only one person at a time. When more than one person is detected within the portal access through the portal is denied.

Pressure Mat

All portals come with infrared presence sensors as a standard feature. However in some environments there maybe interference which affects the correct functioning of the infrared sensor. In these situations it is advised to install a pressure mat as an added security measure. The mat is able to detect the presence of a person inside the portal by using pressure sensors.

Two-zone pressure mat

The Two-zone pressure mat adds an extra verification parameter to the tailgating detection and is recommended for larger size portals.

Return to cost options menu

Web LAN

The Web LAN Control permits simple and intuitive control of the Secure Portal through the web/intranet. This option transforms the Portal into an IP address, therefore you can access to the portal through the LAN by using any computer and a web browser. Return to cost options menu

Internal Alcove

All our Portals are access control neutral. The Internal Alcove accommodates the installation of your chosen internal access control device. Return to cost options menu

Emergency Lever Options

Additional Internal and external Emergency Lever(s) option are available. These can be located inside the portal or on the outside of the portal on the secure side. Return to cost options menu

Outer Finishing

Our portals are available in a range of finishes.
Polished Stainless Steel Brushed Stainless Steel
RAL Colours bronze-150x150Polished/Brushed Brass
Return to cost options menu